Kart Parts There are 225 products.
Brake Fitting Straight Fitting Normal Type
Straight Fitting - Normal Type NORMAL STRAIGHT CONNECTION 1/8 - 6/4mm
Axle Medium 50mm
Axle Medium 50mm x 1010mm 8mm Keyway with 2 Peg ( euro sytle ) Black Heat Treated.
Bearing 30mm Axle ID 30mm OD 62mm SB206zz
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Brake Mounting Nuts 2 off
Brake Caliper Mounting Nut sold as a pair. These are special locking nuts, as they have ro lock under extreme heat and normal Nylocks are not sufficient.
BRAKE PADS SET to suit KSI Mechanical Brakes
KSI GO KART BRAKE PAD Set of 2 / PAIR Suits:
Engine Mount Bolt M10 x 50mm
European Alloy Pedal Extensions. Suit bar type...
European Alloy Pedal Extensions. Suit bar type pedals. Silver
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
