Kart Parts There are 201 products.
Air Box Internal Filter RED NOTE: NOT IAME BRANDED
Internal air filter and rubber RED type Cheetah and X30 if your not racing AKA
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
X30 54,22 r Complete red PISTON IAME Part...
X30 54,22 r Complete red PISTON IAME Part No.: BP-25076-CR Item No. on Diagram : 52A...
X30 54,20 v Complete green PISTON IAME Part...
X30 54,20 v Complete green PISTON IAME Part No.: BP-25071-CV Item No. on Diagram : 52A
KA100 COPPER HEAD GASKET 0.15
COPPER HEAD GASKET 0.15 Part No. : IAA-40200-0.15 Pic Item Number : 10 Group Heading : HEAD AND CYLINDER
X30 Starter Relay IFE-05200
X30 Complete CYLINDER IAME Part No.: 30125030
X30 Complete CYLINDER IAME Part No.: 30125030 To Suit : X30 HEAD AND CYLINDER
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Bead Locks Kartelli Corse thumb tightening set of 3
Set of 3 Kartelli Corse thumb bead locks easy to tighten, thumbtightening beadlocks. Suitable for Douglas, OTK, Kartelli Corse and most quality brand rims