Kart Parts There are 173 products.
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Cable Clamp Flat 2 Screw
Carburettor Cable Clamp
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Spark Plug NGK B10EG replaces B10EGV
NGK B10EG Spark Plug Competition Grade Spark Plug Suits Racing Replaces B10EGV
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Washer Counter Sunk Alloy Black Anodised M6 ( Small )
Floor Tray Rubber Washer M6 - Red
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
