Kart Parts There are 362 products.
GO KART WELD ON BEARING HANGER BRACKET FLANGE OFF-ROAD...
Weld On Bearing Hanger Bracket Type 3 Outer Bearing Hanger For repairs to a damaged karts or the home kart builder
Exhaust Header IAME RL Leopard or Cheetah
Exhaust Header Exhaust Header IAME RL Leopard or Cheetah Aftermarket Kartelli Corse Header
Engine Mount Clamp 30mm x 125mm
Engine Mount Clamp 30mm x 125mm This is a SPEICAL 125mm wide mount clamp
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 32mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Pedal Grip Gold SET
Pedal grip with grub screw mount in gold. These Pedal Grips are 70mm long with a nominal tube size of 14mm
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Air Box Rain Cover Suit AKA43 Airbox
Cheetah Piston Ring
Cheetah Engine piston ring one size fits all. Ring end gap should be 0.4 to 0.45
Cheetah Piston Piston Ring Pin and clips
Cheetah Engine Oversize Piston NO BEARING INCLUDED
Teflon Crank Case Seal
Teflon Race Seal (sold individually)
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH
