Kart Parts There are 175 products.
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Rear Crash Bar Mounting Bolt long
Rear Crash Bar Mounting Bolt long suit plastic rear crash bar
Rear Crash Bar Mounting Bolt Short
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Engine Mount Bolt M10 x 50mm
Engine Mount Bolt M10 x 35mm
Pad Spring and Bolt
Fuel Tank Bolt M8 - Black
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts