Kart Parts There are 217 products.
Blanking Plug For Temperature Sensor Hole
Blanking Plug for temperature sensor hole with copper washer thread M10 x 1 ( standard fitting )
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
Bead Locks O-Ring set of 12 suits all styles of Bead...
Air Box Rubber From Carby to Airbox
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Accelerator Cable Inner Short Lug
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Weld On Bearing Hanger Bracket MIDDLE bearing
Weld On Bearing Hanger Bracket MIDDLE bearing For repairs to a damaged karts or the home kart builder
Rotax Main Jet 182 Rotax Part No.: MJ182
Rotax Main Jet 182 Rotax Part No.: MJ182
