Kart Parts There are 196 products.
Overflow Bottle Red Cap
ARROW X1 X2 X3 BRAKE DISC HUB BOLT SUIT FLOATER DISC
ARROW X1 X2 X3 BRAKE DISC HUB BOLT Suit Floater Disc
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Accelerator Cable Lug Suit KA100, X30, Yamha J,...
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Nippon Denso Irdium Race Spark Plug IW27
Nippon Denso Irdium Race Spark Plug IW27 Suit Rotax All models IAME and Cheetah on cold days less than 25 degrees
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
NGK Spark Plug Lead Splicer
Tie Rod 235mm Black
Black Tie Rod 235 mm Suits most model and brands of karts Suits M8 left and right hand rod ends sold separately
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
