Kart Parts There are 158 products.
Cheetah Flywheel Woodruff Key Ignition side
Cheetah Flywheel Woodruff Key Ignition side. This is slightly thinner than the clutch side woodruff key
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Maxima 927 1 Litre
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Kartelli Corse Cheetah Clutch Puller
Wheel nut front stub axle spindle M14 nylock EACH
Wheel nut front stub axle spindle M14 nylock front wheel nut. EACH Regular replacement is recommended as nylocks wear from regular tightening
.
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Carburettor Cable Clamp
Clutch Drum suit IAME X30 or Cheetah
Clutch Drum suit IAME X30 or Cheetah 4 bolt sprocket