Kart Parts There are 60 products.
Restrictor Cheetah Includes 2 x Exhaust Gaskets
AKA approve and homologated Cheetah Exhaust Restrictor. This restrictor reduces the horsepower of the Cheetah to a level to race in the AKA Class of TAG/R
Hose Fiting suit IAME RL Leopard or SQ Cheetah
Brass hose fitting with copper washer gasket, as used in the cylinder for water inlet and the thermostat cover for outlet in the head. suit IAME RL Leopard or SQ Cheetah
Starter Motor Armature Suit TAG eng. Rotax IAME...
Starter Motor Armature SUIT TAG engines. Rotax IAME CHEETAH Rok ( except Fireball ) Even if you buy a new starter motor, rebuild your old one and keep it as a good spare. Also...
Teflon Crank Case Seal
Teflon Race Seal (sold individually)
Reed Block
Alloy Cheetah Engine Reed Block. Also suits PRD Fireball and IAME RL Leopard (not X30).
Cheetah Piston Piston Ring Pin and clips
Cheetah Engine Oversize Piston NO BEARING INCLUDED
Cheetah Piston Ring
Cheetah Engine piston ring one size fits all. Ring end gap should be 0.4 to 0.45
Main Bearings 6205 bearings
Main Bearings 6205 bearings. Suit CHEETAH and RL Leopard Sold as EACH
Little End Bearing IKO 14 x 18 x 16.5 Silver coated
X30 RL Leopard SQ CHEETAH Clutch Drum Bearing
Clutch Drum and 10 Tooth Sprocket suit IAME X30 KA100...
Clutch Drum suit IAME X30 , KA100 , RL Leopard or Cheetah 10 Tooth 4 bolt sprocket
Clutch Drum suit IAME X30 or Cheetah
Clutch Drum suit IAME X30 or Cheetah 4 bolt sprocket
