Kart Parts There are 167 products.
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Fuel Tank Bolt M8 - Black
Rear Crash Bar Mounting Bolt long
Rear Crash Bar Mounting Bolt long suit plastic rear crash bar
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Chain Breaker 219
Washer Counter Sunk Alloy Black Anodised M6 ( Small )
Washer Counter Sunk Alloy Black Anodised Small. Used for floor mounting kits.
Rotax 11 Tooth Sprocket Part Number 236877
Rotax 11 Tooth Sprocket Part Number 236877 NOTE: When using the 11 tooth sprocket on a Rotax engine a insert bush is required and replaces
Brake Safety Cable Clevis type 650mm
Wheel Nuts Pack of 6 with washers
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm