Kart Parts There are 128 products.
Stub Axle Bearing Spacer 10mm ID x 22mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Stub Axle Bearing Spacer 10mm ID x 17.9 mm Long
Stub Axle Bearing Spacer 8mm ID x 17.9 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Rear Crash Bar Mounting Bolt long
Rear Crash Bar Mounting Bolt long suit plastic rear crash bar
Rear Crash Bar Mounting Bolt Short
Cable Clamp Flat 2 Screw
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Carburettor Cable Clamp
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
