Kart Parts There are 218 products.
Bearing 40mm x 80mm zz
Engine Mount Clamp Billet ultra strong
Engine Mount Clamp extruded billtet with a multifit profile to suit 28, 30 or 32 mm frames.
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Stub Axle Bearing Spacer 10mm ID x 26.5mm Long
Stub Axle Bearing Spacer 8mm ID x 26.5 mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bearing 50mm Axle 80mm OD
Engine Mount 30mm x 125mm with 2 x 125mm mount clamp...
Engine Mount 30mm x 125mm with 2 x 125mm mount clamp suit older Tony Kart and Mike Wilson
Stub Axle Bearing Spacer 8mm ID x 23mm Long
Stub Axle Bearing Spacer 8mm ID x 23mm Long This is the spacer that goes between the top and bottom bearings in stub axle spindles
Bearing 50mm x 90 Axle Sealed. These are heavy duty...
Bearing 50mm x 90 Axle Sealed. These are heavy duty rubber lip seal bearings. Great for dirt or wet weather.
GE8E Bearing to suit camber caster adjusters M8
Tie Rod Rose Joint M8 PHS8L Left Hand Tread
Tie Rod Rose Joint M8 Left Hand Tread Suit older style tie rods
Bearing 50mm Axle 90mm OD
The is a 50mm rear axle bearing Suit most karts ID ( inside diameter ) = 50 mm OD ( outside diameter )