Kart Parts There are 268 products.
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Rear Crash Bar Bush
This is the bush that is inserted in the frame .This part wears over time so it should be replaced on a regular basis.
Nose Cone Clip Nosecone Clamp
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Carburettor Cable Clamp
Cable Clamp Flat 2 Screw
Pad Spring and Bolt
Brake Rod Clevis and Pin Standard Right Hand Thread M6...
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread