Kart Parts There are 243 products.
Cable Clamp Flat 2 Screw
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Brake Rod Clevis Pin 6mm
The Clevis Pin for the end of the brake rod to attach to the Brake Master Cylinder. 6mm
Tyre Pressure Gauge Kartelli 115mm Dial
The Brake Clevis Clevis Clip Red M6 Right Hand Thread
Red Anodised Clevis and Clip Pin for the end of the brake rod to attach to the Brake Master Cylinder. M6 Right Hand Thread M6 Standard Right Hand Thread
Carburettor Cable Clamp
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Stub Axle Bearing suit 25mm stud axle OD 42mm x ID...
Stub Axle Bearing suit 25mm stud axle 6905zz OD 42mm x ID 25mm x 9mm
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
Front Wheel Bearing Set 4 OD 42mm x ID 25mm x 9mm 6905zz
Front Wheel Bearing Set 4 x 25mm stub axle OD 42mm x ID 25mm x 9mm 6905zz