Kart Parts There are 265 products.
Cable Adjuster
Cable Adjuster Suits both ends of the accelerator cable carburettor as well as the chassis
Engine Mount Bolt M10 x 35mm
Pedal Return Spring
Engine Mount Nut each
Engine mount manifold nuts. M10 thread, the nuts are captive inside the engine mount. Sold as each.
Engine Mount Slide Top Plate
Plastic Spacer Washer M6
Plastic Spacer Washer M6 Normally used on front crash bars as a bush.
Engine Mount Bolt M10 x 50mm
chassis plug 32mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Carburettor Cable Clamp
chassis plug 30mm
Actually they are BLACK plastic This is the plug that goes in the end of the chassis rail.(at the back UNDER THE axle) For when neatness counts
Stub Axle Bearing suit 25mm stud axle OD 42mm x ID...
Stub Axle Bearing suit 25mm stud axle 6905zz OD 42mm x ID 25mm x 9mm
Ride Spacer Washers 3 Pack M8 4mm thick
Ride Height Spacers M8 4mm thick Install on either side of the stub axle on the king pin bolt pack of 3
